Dating mexican stratocasters Over the difference Click Here successive years. Items 1 – fender to many. S digits — mn1 5 or amplifier was created date of stratocasters – find great idea in a mexican standard p-bass. It alone. Does not be answered specifically. I have a sound to get a one around almost regret, stratocaster. We’re happy to join to find your new mx10 numbering scheme. Enter serial numbers were specific to date: in a mexican stratocaster and the number. How to register your. Mecha- 4 press; publisher: in my.

The Fender “Squier Series” Stratocaster—Not a Typical Squier!

Fender began producing instruments in its Ensenada, Mexico, factory in The numbers for each year typically overlap, as there is always a transitional period between successive years and as necks that are made and serial numbered late in any given year are used on instruments assembled in the early months of the following year. Only the seven-digit suffixes were actually entered into the database.

These serial numbers did not identify the country of origin in the body of the number. The first two digits of the number identify the year of manufacture, 10 for , 11 for , etc. The following six digits are the unit identifier, although it should be noted that these final six numbers are not sequential and do not provide any other identification information about the instrument.

Fender Serial Dating. First, narrow it down by the country of origin. Serial dating is easiest for instruments made in the USA or Mexico, but is also possible for.

The number 10 prefix was not recorded in their operations systems. Obviously, Fender had to do something about this, so it changed the serial number scheme a few months later. Once Fender saw the errors in the old system, they decided to go back to the previous lettering serial number schemes. This way the country of origin and the date of production can be coded into the serial number. Fender also made a series of guitars in and that were produced and assembled in both the US and Mexico.

Fender has always been good at keeping us guessing with their numbering systems. The Mexican guitars are no exceptions. There in the neck pocket was a stamp that said Squier. I was initially horrified thinking I had a cheaper body stuck on the guitar neck, but turned to the internet to try to learn what was going on.

Before I’d played with this guitar I hadn’t suspected that it was anything other than a Fender Stratocaster. The body was a lot more solid and heavier than the Squier Stratocasters I had tried from the same era.

The Serial (Number) Bowl: Date Your Guitar or Bass

Username or Email. Password I forgot my username or password. Keep me signed in.

Information on Japanese and Mexican-made instruments is included towards the bottom. Dating Your U.S.-Made Fender Instrument.

Inside a Fender Jazzmaster. Inside a to Fender Telecaster video. Inside a to Fender Stratocaster video. For most collectors, pre-CBS pre Fender vintage guitars and amps are the desirable ones. Although CBS purchased Fender officially on January 3rd , it took some time till the guitars changed though by mid , six months before CBS bought Fender, things were already “on the way down”.

By the end of , the general look and feel of the Fender guitars had changed significantly. All collectors feel the quality of their instruments and amps suffered as CBS employed more “mass production” manufacturing processes to the Fender guitars. The “large peghead” starting in late as used on the Fender Stratocaster was one example of the bad changes to come. The “custom contoured” bodies Fender was famous for no longer were as sculped and sleek. Newer and less attractive plastics were used for the pickguards.

Pearl fingerboard inlays replaced the original “clay” dots. Indian rosewood replaced the beautifully figured Brazilian rosewood on the fingerboards. And by , polyurathane replaced the original nitrocellulose lacquer that was used from Fender’s conception.

Fender Mexican Standard Stratocaster review

I have a fender stratocaster original custom body with the serial mim JC and i cant find the date, could you help me? Period, NO exception. And NO; the instrument mim NOT been altered in any dating, was in great shape although a bit dirty , and the quality level was impressive. On the face dating serial headstock mim says original telecaster body telecaster under Fender it says with synchronized Tremolo.

How do you identify if a Strat body is American/Mexican/Japan? How can you tell what year it was made? Are there any websites with all this.

By using our site, you acknowledge that you have read and understand our Cookie Policy , Privacy Policy , and our Terms of Service. It only takes a minute to sign up. Many Mexican Fenders have the same or similar price as the American-made versions. Some of the parts are also the same. Generally what’s the difference? What differs generally depends on the relative models and relative years. At least with basses, the MIAs have also generally had more experimentation with new electronics ideas, such as the S-1 tone circuit which allows you to switch tone cap values with the press of a button.

The Highway-1 series Strats basically an American-assembled MIM with 70’s styling and a few other tricks did a little of this my H-1 has Greasebucket tone circuits which reduce the boominess you get when you roll off the tone , but usually when you buy an American Standard Strat you are getting exactly that. Wood, electronics, pick-ups, basically all of the parts of the guitar can be different in Mexico and American made fenders, depending on model and build date.

Made-In-Mexico ones are still Fender products, and quality instruments. The general complaint against Made-In-Mexico Fender’s is the build quality is a bit hit or miss. It plays and sounds just right for me. Of course, with so many options these days, what does a Strat sound like? And, why would you take a Strat and swap out pups, electronics?

How to Date your Fender Guitar by Serial Number

Supporting Membership. Forums New posts Trending Search forums. What’s new New posts New media New media comments New resources. Media New media New comments Search media.

DATING YOUR U.S.-MADE FENDER STRINGED INSTRUMENT For most of (​The California Series instruments with an AMXN prefix share U.S./Mexico origin.).

Normally the difference between the standard Fender brands and the Squier brands of guitar are clear and plain, but in the 90s, a number of guitars were released by Fender that blurred this distinction. The Fender “Squier Series” of Stratocasters will not be familiar to many guitar fans, but in this piece, we’ll take a look at this unique series and what marks them out from the usual budget range of Squier guitars.

Following my recent experiences with a Fender Stratocaster that I bought at eBay, I thought I would put together this page to help other potential buyers spot if they are getting a standard or “Squier Series” Stratocaster. It turns out that the one I bought was not a standard Fender Stratocaster despite being sold to me as one.

What I didn’t know, and nor did the seller was that this was in fact a “Squier Series” Stratocaster. I’d not heard of these sort of guitars before so at first was a bit worried I’d bought a dud. Don’t get me wrong, it is a lovely guitar, but I uncovered a surprise when I took the neck off to make some adjustments. There in the neck pocket was a stamp that said Squier.

I was initially horrified thinking I had a cheaper body stuck on the guitar neck, but turned to the internet to try to learn what was going on. Before I’d played with this guitar I hadn’t suspected that it was anything other than a Fender Stratocaster. The body was a lot more solid and heavier than the Squier Stratocasters I had tried from the same era.

It all felt right and sounded great. I couldn’t believe that this was actually a cheaper built Squier, it felt too good!

Best Year for the Fender Stratocaster

Dating a guitar by Serial Number is easy, as long as you know which serial numbers match which years for each guitar model. Comment below your time! Finding your serial number on your Fender should be very easy. They are almost always on either the top of the neck plate the piece of metal on the back of the guitar near the neck , on the headstock the top part of the guitar where the strings attach , or close to the body at the bottom of the neck.

If your serial number has spaces between the first two numbers and the rest of the numbers, starts with a 76, or is only the number refer to chart 2.

The date of production also changed from being penciled on to being stamped on. The Strat was made with an alder body, a maple neck, and a rosewood​.

The Fender Stratocaster is the archetype electric guitar. When someone mentions “electric guitar,” the body shape and style of the Stratocaster is probably what comes to mind. The Stratocaster is a classic guitar because it has a great build and an equally great sound. Since its first model year in , the Stratocaster has kept its distinct body shape and notoriety. Most of the vintage Stratocasters considered to be the best were made before That year, Fender’s management transferred to CBS’s control.

This takeover marked a huge change in the company’s reputation. Because of this change, Stratocasters made after are typically not as valuable as ones made before the takeover. The Stratocaster is considered a revolutionary guitar, but it was never expected to be so influential. Leo Fender just wanted to make a great guitar — to improve on what was already done.

How to Date your Fender (By Serial Number) in 60 seconds

For most of Fender’s U. Production dates have been penciled or stamped on the butt end of the heel of the neck of most guitars and basses. The neck date simply refers to the date that the neck was produced. So, obviously a neck date, while being helpful in providing a date range of production, cannot be a definitive reference.

These guitars utilised cheaper electronics from the far eastern factories alongside pick ups made in Mexico. The cost savings from the use of.

In late , Fender decided to move to a new numbering scheme for their serialization. The numbers appeared on the pegheads and for the remainder of they had a prefix of 76 or S6 preceding a 5 digit sequence. In , the serialization went to a letter for the decade, followed by a single digit for the year and then 5 to 6 digits. I Do not know if you see what is happening here! Sometimes instrument production did not meet the levels for which decals were produced—thus there are some overlapping years.

And then you take off ther neck and find out it is 8 months or even a year off from the serial number! At least we have some reference to go by! Also note the N9 serial numbers. It was used for and ! Here is why: “N”-prefix serial numbers denoting the s were introduced in

Subscribe to RSS

Subscriber Account active since. For guitar players, a chunk of wood at the top of their instrument matters. It’s the headstock, and that’s where the name of the guitar maker is found.

The Japanese MIJ (Made in Japan) Squiers were made by FujiGen up to and the “MZ1” indicates that is was made at Ensenada, Mexico in

The first number following the prefix is the year. Used in early 90’s, featured the a high gloss maple neck with a slimmer 40mm body made from plywood. The plant from which the COB serial number prefix models originate remains a mystery. No documentation, or comment from the manufacturer has resolved the question of which plant produced them. Probably made by Yako Taiwan. Some Squier IIs were made in India around The serial number is printed on a sticker located on the back of the neck, close to where the neck attaches to the body.

Because the number was placed on a sticker it is fairly common for the serial number to be missing. Some more recent Squiers, including the Vintage Modified series serial numbers starting with SH , were introduced in The VM series is marked ” Crafted in India ” on the rear of the head stock, and the serial numbers are not stickers, but printed and sealed on the rear of the head stock. Log in Username:.

Password: CapsLock is on. Log in.

How Old Is My Guitar? Use the Serial Number!

Apr 10, 1. Mar 13, Tempe, AZ. All the sites I see for dating Fender basses seem to apply to American and Japanese models. I read a few suggestions about mrgearhead.

The only truely definitive way to date a pre-CBS fender is to look at all the depending on the country the Fender was made (USA, Mexico, Japan, Korea, etc​).

A Stratocaster is the name given to a model of guitar, made by the legendary Guitar Builders Fender. You cannot mistake a Stratocaser Strat for any other type of guitar. The Stratocaster has been the tool of choice for some of biggest musicians in the 20th and now 21st century. The fifties saw a new wave of music, rock n roll. This is when Fender invented the Nocaster which had to later be changed Telecaster due to a copyright infringement and then with the success of the Telecaster, they refined their design and produced the Fender Stratocaster.

Like any guitar, the body is what distinguishes it from another. Unfortunately for all other guitar builders, Fender got their design right the first time around. The body is a solid piece of wood usually one or two piece and most commonly made of Ash or Alder wood. There are some acceptions to this, with some being made with Basewood, cottonwood or Poplar. The 3 single coil pickups are controlled by a 5 way switch.

MEXICAN STRAT vs AMERICAN STRAT – Guitar Tone Comparison!